In this way you have a saving of chemical (back and / or fixative) above 50%, saving over the disposal of sludge (the remaining 50% of the product that is not deposited on the skin) caused by the spraying cabin.
Also you have the energy savings indicated in the table below (electric power, water and compressed air) and less noise: 70 dB (A) for the TOPSTAR and 80 dB (A) for a spray cabin.
Finally, there is a better duration of tunnel transport’s wires and the elimination of the weekly cleaning of spray cabins (in the case of fixatives the cleaning is very difficult to do and it produces waste expensive to dispose).
| SPRAYSTAR-W W.W. 3400 mm | ||
| Water consumption | ||
Water consumption of a Spraystar-W spray cabin, in maintenance every 40 working hours (1,700 l) | 42.50 l/h | |
| Water consumption of a Scrubber mod. G22 (working) | 22.00 l/h | |
| Total Water consumption of a Scrubber mod. G22 every 40 hours for cleaning and waste sludge (750 l) | 18.75 l/h | |
| TOTAL | 83.25 l/h | |
| Water consumption during the washing of the spray guns at each article change | 20÷35 l | |
Power | installed | absorbed |
| Gearmotor carousel | 1.10 Kw | 0.77 Kw |
| Water recirculation pump | 4.00 Kw | 2.80 Kw |
| Scrubber Engine | 22.00 Kw | 15.40 Kw |
| Scrubber Pump | 0.75 Kw | 0.52 Kw |
| TOTAL | 27.85 Kw | 19.49 Kw |
| Compressed air consumption | ||
| Compressed air consumption of a spray cabin | 6,200 l/h | |
| Blowing tube for remove dust from the skin | 1,500 l/h | |
| TOTAL | 7,700 l/h | |
| TOPSTAR | ||
Power | installed | absorbed |
| TOTAL | 7.85 Kw | 5.20 Kw |
| Compressed air consumption | ||
| Machine | 400 l/h | |
| Pump | 1,500 l/h | |
| Blowing tube for remove dust from the skin | 1,500 l/h | |
| TOTAL | 3,400 l/h | |
| Water consumption | ||
| Water consumption during the washing at each article change | 20÷35 l | |
Topstar